Leading supplier of quality industrial valves, actuators, pipe, hose, flanges, fittings and all accessories.

Our Products - Manual Ball / Butterfly Valve

• Sandwich Ball Valve (Design – Wafer Type Ball Valve )

SPECIFICATIONS:
Model:	PRB
Valve Design :	Sandwich Design – Wafer Type Blow Out Proof Stem Ball Valve - Floating Ball Up To 2”
Size Range :	1/2" to 4"
MATERIAL OF CONSTRUCTIONS :
Body :	CF 8 (S.S. 304), CF 3 (S.S. 304 L), CF 8 M (S.S. 316), CF 3 M( S.S. 316 L), CAST STEEL ( WCB 216) (Other Greads Are Available On Request)
Ball :	CF 8 (S.S. 304), CF 3 (S.S. 304 L), CF 8 M (S.S. 316), CF 3 M( S.S. 316 L) ( Solid Ball is available on request)
Stem :	S.S. 316, S.S. 304, And S.S.410
Seat And Seal :	PTFE (GFT /CFT is available on request)
Pressure Rating :	150 #, 300 #
End Connection :	Wafer Type Suits To ANSI B 16.5 Class 150 Flanges

• 3 way 4 way Ball valves(Bolted Bonnet Design 3 Piece Ball Valve – Flanged End / Screwed End)

SPECIFICATIONS:
Model:	RBI
Valve Design :	Bolted Bonnet Design 3 Piece Blow Out Proof Stem Ball Valve - Floating Ball Up To 3” , Trunnion Ball 4” To 8 “
Size Range :	1/2" to 8"
MATERIAL OF CONSTRUCTIONS :
Body :	CF 8 (S.S. 304), CF 3 (S.S. 304 L), CF 8 M (S.S. 316), CF 3 M( S.S. 316 L), CAST STEEL ( WCB 216) (Other Greads Are Available On Request)
Ball :	CF 8 (S.S. 304), CF 3 (S.S. 304 L), CF 8 M (S.S. 316), CF 3 M( S.S. 316 L) ( Solid Ball is available on request)
Stem :	S.S. 316, S.S. 304, And S.S.410
Seat And Seal :	PTFE (GFT / CFT is available on request)
Pressure Rating :	150 #, 300 # ( 600 # Available On Request)
End Connection :	Screwed End To BSP/NPT, Socket Weld /But Weld Ends, Flanged End To ANSI B 16.5 Class 150 / 300, (Table D, E, F is available on request), Tri-Clover Ends
Fire Safe Design is Available

• 2/2 HIGH PRESSURE (BALL VALVE 700 BAR)

SPECIFICATIONS:
Body & Adaptor :	Forged C.S. / S.S.304 / S.S.316
Ball :	S.S.304 / S.S.316
Steam :	S.S.304 / S.S.316
'O' Ring :	Viton
Washer :	Delerine
Stopper Pin :	S.S.304
Washer :	Spring steel
Bolt :	C.S. / S.S.
Handle & Stopper Plate :	CS Powder Coated
Pressure :	As per table
Temprature :	80° C (High Temprature Available on Request)
Media :	Air,water,Oil & Gas.

• 3/2 HIGH PRESSURE (BALL VALVE 500 BAR)

SPECIFICATIONS:
Body & Adaptor :	Forged C.S. / S.S.304 / S.S.316
Ball :	S.S.304 / S.S.316
Steam :	S.S.304 / S.S.316
'O' Ring :	Viton
Washer :	Delerine
Stopper Pin :	S.S.304
Washer :	Spring steel
Bolt :	C.S.
Handle & Stopper Plate :	CS Powder Coated
Pressure :	As per table
Temprature :	80° C (High Temprature Available on Request)
Media :	Air,water,Oil & Gas.

• FLUSH BOTTOM BALL VALVE (DESIGN –WAFER TYPE/FLUSH BOTTOM BALL VALVE-PNEUMATIC ACTUATOR OPERATED)

SPECIFICATIONS:
Model:	FBV
Valve Design :	FLUSH BOTTOM-WAFER TYPE BLOW OUT PROOF STEAM BALL VALVE-FLOATING UP TO 2”
Actuator	SINGLE ACTING (SPRING RETURN) /DOUBLE ACTING
Size Range :	1” TO 4”
MATERIAL OF CONSTRUCTIONS :
Body :	CF 8 (S.S. 304), CF 3 (S.S. 304 L), CF 8 M (S.S. 316), CF 3 M (S.S. 316 L), CAST STEEL (WCB 216) (Other Greads Are Available On Request)
Disc :	CF 8 (S.S. 304), CF 3 (S.S. 304 L), CF 8 M (S.S. 316), CF 3 M (S.S. 316 L), CAST STEEL (WCB 216) (Other Greads Are Available On Request)
Stem :	S.S. 316, S.S. 304, and S.S.410
Seat And Seal :	PTFE (GFT /CFT is available on request)
Pressure Rating :	150#
End Connection :	WAFER TYPE SUITS TO ANSI B 16.5 CLASS 150 FLANGES
Fire Safe Design is Available

• FLUSH BOTTOM Ball valves( DESIGN-WAFER FLUSH BOTTOM Ball Valve –MANUAL OPERATED)

SPECIFICATIONS:
Model:	FBV
Valve Design :	FLUSH BOTTOM-WAFER TYPE BLOW OUT PROOF STEAM BALL VALVE-FLOATING UP TO 2”
Size Range :	1” TO 4”
MATERIAL OF CONSTRUCTIONS :
Body :	CF 8 (S.S. 304), CF 3 (S.S. 304 L), CF 8 M (S.S. 316), CF 3 M( S.S. 316 L), CAST STEEL ( WCB 216) (Other Greads Are Available On Request)
Ball :	CF 8 (S.S. 304), CF 3 (S.S. 304 L), CF 8 M (S.S. 316), CF 3 M( S.S. 316 L) ( Solid Ball is available on request)
Stem :	S.S. 316, S.S. 304, And S.S.410
Seat And Seal :	PTFE (GFT / CFT is available on request)
Pressure Rating :	150#
End Connection :	WAFER TYPE SUITS TO ANSI B 16.5 CLASS 150 FLANGES
Fire Safe Design is Available

• WAFER - CENTER DISC DESIGN PHARMA BUTTEFLY VALVE WITH PNEUMATIC ACTUATOR OPERATED

SPECIFICATIONS:
Model:	PBV
Valve Design :	WAFER -CENTER DISC DESIGN PHARMA BUTTEFLY VALVES
Actuator	SINGLE ACTING (SPRING RETURN) / DOUBLE ACTING
Size Range :	6” TO 12”
MATERIAL OF CONSTRUCTIONS :
Body :	CF8 / CF8M / CF3M
Ball :	CF8 / CF8M / CF3M
Stem :	S.S. 316, S.S. 304, AND S.S.410
Gland Seal :	SILICON
Seat	SILICON
Pressure Rating :	UPTO 6 BAR/VACCUM
End Connection :	WAFER TYPE TO SUIT ANSI 150 # FLANGES (OTHER STANDARD ALSO AVAILABLE ON REQUEST)

• WAFER - CENTER DISC DESIGN PHARMA BUTTEFLY VALVE MANUAL HAND LEVER OPERATED

SPECIFICATIONS:
Model:	PBV
Valve Design :	WAFER -CENTER DISC DESIGN PHARMA BUTTEFLY VALVES
Size Range :	6” TO 12”
MATERIAL OF CONSTRUCTIONS :
Body :	CF8 / CF8M / CF3M
Ball :	CF8 / CF8M / CF3M
Stem :	S.S. 316, S.S. 304, AND S.S.410
Gland Seal :	SILICON
Seat	SILICON
Pressure Rating :	UPTO 6 BAR/VACCUM
End Connection :	WAFER TYPE TO SUIT ANSI 150 # FLANGES (OTHER STANDARD ALSO AVAILABLE ON REQUEST)

• Butterfly Valve WAFER TYPE Short Pattern Double Flanged Type Center Disc Design Butterfly Valve With GEAR OPERATED

SPECIFICATIONS:
Model:	DFW -ECO
Valve Design :	Short Pattern Double Flanged Type Center Disc Design Butterfly Valves
Size Range :	4” To 48”
MATERIAL OF CONSTRUCTIONS :
Body :	Cast Iron/ Ductile Iron / SG. Iron / Cast Steel/S.S. 304 / S.S. 316
Ball :	Cast Iron/ Ductile Iron / SG. Iron / Cast Steel/S.S. 304 / S.S. 316 (Nylon – Teflon Coated / Rubber Lined)
Stem :	S.S. 316, S.S. 304, And S.S.410
Gland Seal :	PTFE (GFT / CFT is available on request)
Seat	EPDM / Nitrile /Hayplon/Viton (Moulded Or Replacable Mufler type
Pressure Rating :	PN 10 / PN 16
End Connection :	Wafer Type To Suit ANSI 150 # Flanges (Other Standard Also Available On Request)

• SPHERICAL DISC VALVE HANDLE / GEAR OPERATED

SPECIFICATIONS:
Model:	SDV
Valve Design :	WAFER TYPE HIGH PERFOMANCE DOUBLE ECCENTRIC DISC DESIGN BUTTERFLY VALVE
Size Range :	1.1/2” TO 48”
MATERIAL OF CONSTRUCTIONS :
Body :	Cast Iron/ Ductile Iron / SG. Iron / Cast Steel/S.S. 304 / S.S. 316 (IS 2062 Gr B for Fabricated Design)
Ball :	Cast Iron/ Ductile Iron / SG. Iron / Cast Steel/S.S. 304 / S.S. 316 (IS 2062 Gr B for Fabricated Design)
Stem :	S.S. 316, S.S. 304, and S.S.410
Gland Seal :	PTFE (GFT / CFT is available on request)
Seat	EPDM / NITRILE / PTFE
Pressure Rating :	PN 10 / PN 16 /PN 25/150 # / 300 #
End Connection :	Wafer Type to Suit ANSI 150 # Flanges (Other Standard Also Available On Request)